| An appropriate EazyMatic garage door opener for each type of garage door. |
 |
 |
 |
 |
| Butterfly door |
Hinged door |
Sectional door |
Sliding door |
|
| Don't pull your old door downright out. Please contact us first and we will advise you about the possibilities to automate your old door. The EazyMatic garage door openers are robust built and can activate even your old door, for instance with counterweights.
|
||||
| TM 2 AEH |
|
 |
 |
|
Der Multifunktionelle Antrieb für Einstellhallen bis 25 Stellplätze und einen Hub von max. 4m Gleichstrommotor 40 Volt mit stufenloser Auffahr- und Verzögerungsrampe. |
||
| 2 x Minuterie | Schleusenfunktion |
|
| 3 x Knopf-LS |
Teilöffnungsweite |
|
| Dämmerungsschalter | Brandfallsteuerung |
|
| Kraftmessung Kat. 3 |
dynamische Offenhaltezeit |
|
| Schnellschliessung | zweizeiliges multilinguales Display |
|
| Abmessungen Antriebskasten |
|
|
| Länge | 400mm | |
| Breite | 240mm | |
| Höhe | 125mm | |
| Gesamtlänge (Standard) |
3200mm | |
| Speziallängen | auf Bestellung erhältlich | |
|
|
||
| TM 3 S |
|
 |
 |
|
The powerful garage door opener for parking hall doors, with many feature options.
|
||
| Light switch timer |
3 min |
|
| Motor protection |
2 Thermal switch |
|
| Sec. potential |
24 Volt |
|
| Pulling force |
over100 kp |
|
| Speed | 5 to 26 cm/sek. |
|
| Dimensions drive box |
|
|
| Length |
380mm | |
| Breadth |
340mm | |
| Height |
180mm | |
| Total length (Standard) |
3000mm | |
| Special lengths |
available on request |
|
|
(We reserve the right to alter technical specifications)
|
||
| Pos | Denomination |
Feeder |
Installation |
| 1 | Drive TM3S |
230V 3x1,5 PNE | Ceiling |
| 2 | Self-monitoring, electrical safety edge |
2x1,0 trailing cable |
Door/closing edge |
| 3 | Nachschaltschwelle | 2x1,0 cord |
Access ramp |
| 4 | Limit of the contact with the floor (BKS) | 11th sheath : empty with a single wire |
Floor |
| 5 | Switch of the limit of the contact with the floor |
U72 1x4x0,8 | Wall |
| 6A | Photo sensors (emitter/receiver) |
U72 1x4x0,8 | Intrados (in-wall) |
| 6B | Photo sensors box |
Intrados (on/in-wall) |
|
| 6C | Photo sensors pillar |
Floor/wall |
|
| 8 | Internal push-button |
U72 1x4x0,8 | Wall int. (on-wall) |
| 8 | Internal push-button with a programming radio key |
U72 1x4x0,8 | Wall int. (on-wall) |
| 9 | Emergency stop button |
230V 3x1,5 PNE | Wall int. (on-wall) |
| 14 | Service door switch |
2x1,0 Trailing cable |
Service door |
| 18 | Radar motion detector |
U72 1x4x0,8 | Ceiling (on-wall) |
| 21 | Key switch (cylinder at the builder's option) |
U72 1x4x0,8 | Wall/pillar (in-wall) |
| 24 | Pillar of the key switch (set in concrete) |
Floor |
|
| 25 | Coding switch |
Radio |
Wall (on/in-wall) |
| 26 | Radio receiver |
Integrated in the drive |
|
| 35 | Signal lamp red/green |
230V 5x1,5 PNE | on-wall |
| 36 | Signal lamp on pillar |
230V 5x1,5 PNE | pillar |
| 37 | Signal control |
230V 3x1,5 PNE 24V 2x1,0 cord |
on-wall |
| 50 | Junction box |
at the builder's option |
|
| 51 | Rubber trailing cable |
2x1,0 resp. 4x1,0 | |
Swiss Made
EazyMatic AG
Mellingerstrasse 19
5413 Birmenstorf
Phone +41 56 210 14 44
Fax +41 56 210 14 41